GTA Breaker Parts

[BIG_MVS]

Yes, that's me, before I realised there was such a large following for these cars and you were just a chancer with a few bits - just thought it was me that was a bit strange.

Parts
No aircon - is the cover much different.
Also front offside bonnet strut bracket to inner wing.
Steering wheel boss - the wheels OK see picture.

Just noticed threads in picture, can run a couple of bolts down those - guess that is why they are there.

A chancer! The cheek! I have been called worse though I suppose....

Air Con one is Slightly different a pic is in my signature.

Should have the bonnet strut, got a boss also if you need it but as per your thread you should be able to remove with 2 bolts.

Just noticed threads in picture, can run a couple of bolts down those - guess that is why they are there.

Yes, you need two bolts of the right thread (sorry don`t actually know the size.....but someone here will advise) then having removed the two bolts in the elongated holes, run the other bolts into the threads and as they tighten up....off pops the steering wheel.
quote]
The removal bolts are 7 x 1mm and usually have an 11mm head. Most common use on Renaults for these bolts is holding the halves of the gearbox together.

The removal bolts are 7 x 1mm and usually have an 11mm head. Most common use on Renaults for these bolts is holding the halves of the gearbox together.

Thanks Alan

Any chance you'd have the following please...?

77 00 266 532 Fuel pipe (feed to t-split before rails) p13.191 item23
(not sure if the mod part 60 00 007 685 would work on my '86 GTA?)

and

60 00 007 679 Oil pipe (short vertical pipe on breather chamber) p13.431 item 16

... I suspect not, as you'll probably be keeping them with the engine as a whole unit?

Ta muchly

Thanks for the info guys. M7 X 1 , what were they thinking of when they selected that size.

Martin - I will be in Chester quite a lot in November so I will have the parts from you then, unless your around this area before.
Not sure about the air con plastic tray, would prefer the proper one!
More important is the lower strut bracket rather than the strut itself.

Cheers

Andrew

[BIG_MVS]

Thanks for the info guys. M7 X 1 , what were they thinking of when they selected that size.

Martin - I will be in Chester quite a lot in November so I will have the parts from you then, unless your around this area before.
Not sure about the air con plastic tray, would prefer the proper one!
More important is the lower strut bracket rather than the strut itself.

Cheers

Andrew

Give me a buzz Andrew and we can sort something out.

Martin - 07768 728980

[BIG_MVS]

More pics added after a sort through today, let me know if they are of interest

http://s170.photobucket.com/albums/u256 ... or%20Sale/

What price for the V6 turbo motor.
Was it running and what milage.
Any service history.

Regards Tim.

Hi, is the rad fan still for sale & how much?

[BIG_MVS]

Hi, is the rad fan still for sale & how much?

Yes still got it. PM sent

Any chance that you may have a rear window glass hatch?

Any chance that you may have a rear window glass hatch?

if he hasn't mr Dell can sell you a new one

I have emailed Mr Dell as well.

[BIG_MVS]

Any chance that you may have a rear window glass hatch?

Afraid not. Steve is your man, you will need to call him though or you will be waiting a long time for an email response...

Do you mean the rear glass screen, if so I have one for sale! Pm me!